ASAT® Camo Dip Kit

THIS KIT INCLUDES :

•1 meter film of ASAT Camouflage •4 oz Aerosol can of activator •4 oz Aerosol can of primer •4 oz Aerosol can of base coat paint •4 oz Aerosol can of clear top coat •Mask •One pair of latex gloves •3" x 4" Scuff pad •Detailed instructions for the dipping process •Web Page link or URL with a username and password to a detailed full video of the dipping process and instructions

WATER TRANSFER IMAGING MADE EASY

MyDipkit is a do it yourself version of the commercial process known as water transfer imaging. This allows you to process parts on a small scale in your home. The kit contains the printed film, chemicals, and basic supplies needed for processing parts at home. You will need to provide a container for dipping the items in. You will also need to supply warm water, and the item to be decorated. With this kit you will be able to camo dip your own items.

This is the same process that gun and ATV manufacturers use to print camo patterns on their guns and ATVs. In addition this is the same process that automotive manufacturers use to print wood grain patterns on plastic interior pieces. This process can be done on any part that can be safely submerged under water. The basics steps are:

•Clean and prep the part • •Base coat the part • •Dip the part • •Clear coat the part

HOW DO I USE MY DIP KIT?

NOTE: Detailed instructions for each step are included with the kit. Also, included with the instructions is a link with username and password to an online video showing the process and detailing the instructions.

1.Clean the part: The part must be free of all dirt, oils, wax, grease, loose paint or other containments that could affect the finished product. 2.Prep the part: Mask off areas not to be printed on etc. Primer the part. 3.Paint the part: Spray the part with the appropriate base coat. 4.Dip the part: Item is submerged into dipping container with the film floating on top of the water. 5.Rinse the part: Rinse the part to remove any residue from the dipping procedure. 6.Finish coat: Finish the item with the spray clear coat.

HOW DOES THE WATER TRANSFER IMAGING PROCESS WORK?

Products are decorated using a print, which resides on a thin base of water-soluble film. The printed film is placed on the surface of the water, and the base begins to dissolve. A patented activator chemical is sprayed over the film causing the ink to remain floating in an oil-like state on top of the water. Next the properly prepared part is immersed into the water, and the upward pressure of the water causes the ink to wrap around and adhere to the item. After the entire item has been immersed, it is removed from the water, cleaned and then coated with a clear coat.

More info is available on www.mydipkit.com

www.mydipkit.com/instructionvideo/instructionvideo.php

This item is non returnable and non refundable. ASAT OUTDOORS, LLC is not liable for results from any use of this product.

This item can only be shipped ground (NO 3,2,or Next Day Air).

This item can not be shipped overseas.